System NS200 and NS240

System NS200 – high-performance welding system for fine mesh from 0.5 – 2.5 mm

The NS200 system is a fine mesh welding system for maximum product quality and per­for­mance. Depend­ing on the spec­i­fi­ca­tion, the cross wires are fed to the elec­trode level indi­vid­u­ally or in dupli­cate via a special trans­port and oscil­lat­ing gripper system. The wire mesh is extracted via a rub­ber­ized 3-roller system arranged behind the welding portal. This enables infi­nitely variable pitches.

Prop­er­ties:

• Line and cross wire feeding from spools, coils or reels
• Trans­port gripper for cross wire haul-off
• Oscil­lat­ing gripper for trans­port­ing the cross wire to the elec­trode level
• Reg­u­lated grid feed through rub­ber­ized 3-roller system guar­an­tees high accuracy
• Rotary shears for trimming and cutting the grid into several strips
• Winding device with expand­ing mandrel and inte­grated scissors
• Inter­me­di­ate storage for roll changes without stopping pro­duc­tion
• Oscil­lat­ing welding traverse with pneu­mat­i­cally adjustable welding presses
• State-of-the-art function and welding current control
• High uniform weld knot strength

Area of appli­ca­tion:

• Wired glass nets
• Light­weight wire cages for animal hus­bandry
• Light­weight and fence mesh
• Coarse filters for air con­di­tion­ing tech­nol­ogy
• Grille for fans
• Screed grid
• Plas­ter­ing grid

NS240 for a wide range of appli­ca­tions

The NS240 system is a mesh welding system with double cross wire inser­tion and disc inser­tion for maximum reli­a­bil­ity. A con­sis­tently applied modular system of indi­vid­ual system com­po­nents allows the right system to be put together for every appli­ca­tion. The mesh feed is realized by two con­tin­u­ously oper­at­ing comb pull-outs. This achieves a very high mesh quality.

Prop­er­ties:

• Line and cross wire feed from spools, coils or reels
• Cen­trally adjustable straight­en­ing units for the quickest adjust­ment to dif­fer­ent wire diam­e­ters
• Double cross wire feed, result­ing in high cycle rates
• Servo-electric cross wire shears
• Feeding the cross wires with disk inser­tion
• Rotary shears for trimming and ripping
• Con­tin­u­ous grid pull-out with two comb pull-outs
• High-performance shears for cutting line wires in mat pro­duc­tion
• Stacking device designed for high pro­duc­tion speeds without stopping pro­duc­tion
• Semi-automatic and fully auto­matic rewind­ing device with inter­me­di­ate storage for changing rolls without stopping pro­duc­tion
• Oscil­lat­ing welding traverse with eccen­tric drive
• Pneu­mat­i­cally adjustable welding force

Area of appli­ca­tion:

• Grids for baskets
• Cages for animal breeding and hus­bandry
• Light­weight and fence mesh
• Trans­port con­tainer
• Mesh boxes and con­tain­ers
• Screed grid
• Baskets for ballast shoring
• Plas­ter­ing grid