System MG950, the new welding machine for complex meshes in small batches
The new MG950 system is a mesh welding machine, which is designed primarily for the production of industrial mesh. The aim was to broaden the product portfolio with a welding machine that is flexible in relation to various mesh geometries, achieves high production speeds and exhibits the highest quality right from the first mesh.
The highly ﬂexible single welding groups with a width of less than 50 mm (2.0 in) and a straightforward possibility of connection to two independent circuits make extremely productive manufacture of very complex meshes possible in the smallest batch sizes.
- Mesh width 200 - 1600 mm (7.9 - 63.0 in)
- Mesh length 300 - 3000 mm (11.8 - 118.1 in)
- Wire diameter 2.0 - 8.0 mm (0.08 - 0.31 in)
- Line wire spacing min. 20 mm (0.8 in)
Cycle speeds of up to 150 wires per minute and two efficient direct current medium frequency circuits if required allow a high level of productivity for complex and sophisticated meshes. This is without reverting to cascading which reduces efficiency.
The positioning of the very stable line wire feeds is supported by a very precise measurement system. The operating software determines the correct welding parameters.
In this way the necessary quality for sale of the mesh is attained as soon as the ﬁrst mesh produced following conversion.